Tuesday, March 26, 2013

SDCC Costume: Zelda Part 4 - Belt/Tabard

Progress has been continuing on the most detail-ridden costume I've ever undertaken. I recently completed (it's a relative term right?) the belt and tabard pieces that hang in front of the skirt. It felt funny making this huge piece to cover the skirt... that I'd been painstakingly detailing for what felt like a lifetime (she says as if THAT step was totally done).

I created the belt with craft foam and chain, following the same process as the shoulder armor

 As before, this step was very messy...

...But it came together pretty easily.

I used a main center gem that I pulled off a clearance necklace from Old Navy. I got the whole necklace for 99 cents - cheaper than buying individual fake gems that size! I then sealed and painted the foam (covering the gem in painter's tape to protect it), added another crystal to the center and built the belt using chain and jewelry rings:

There are also blue cabochons in each of the teardrops, but I don't have a picture with those on yet since I had to order them special. This completes the belt portion, except for adding some paint aging to it, which I'll do a bit later.

Up next is the tabard. I was nervous about this part as it's quite detailed and front-and-center on the costume. After sketching the pattern out on tracing paper (like I did with the skirt embellishments) I was ready to get moving.

I used a mix of different colors of canvas, felt, and the same fake leathers as the skirt. The canvas kept everything nice and stiff which I liked. I had to dye the blue canvas to an ombre from blue to purple. This part went pretty well, which is good because I don't dye things that often so I was nervous. I then had to very carefully mark where to cut the canvas out so that the seam would fit perfectly behind the silver leather detailing and attach it to the green backdrop.

Then I set about cutting out the silver detailing - the most time consuming and messy part of this entire process:
Needless to say I had to keep the cats out of the room for this part. Also I apparently do most of my work directly on the floor.

The fake leather was applied with a strong adhesive, and I was pretty pleased with the result. After adding a bit more detailing in felt I lined the back with more green canvas and called it 'done':

It's difficult to photograph because of the reflection, and as I mentioned I still have to age the belt which is what will really make it look real. Overall I'm satisfied but there are a couple little oops spots that irritate me. My husband thinks I'm insane, but *I* know they are there.

Slowly but surely, it's coming together!

Tuesday, March 19, 2013

A Quickie Quilt

So I've been having some issues with depression lately and getting bogged down both creatively, and in the use of my free time. So this past weekend I thought one way that might help me to break out of my funk would be to run out a quick and dirty project, both to recharge my batteries and drain-o the creative constipation I've been having (lovely visual yes?)

Seeing as it was St. Patrick's day, I thought - why not make an Irish Chain quilt?

Why not indeed.

It's a simple pattern that I'd done a variant of once before, so I scooped up my pile of coupons and snagged some quilting cotton at Joanns for a weekend of 'personal time' with my sewing machine (wow, 2 slightly disturbing visuals in one post - I'm on a roll!).

An Irish chain is a basic criss-cross design, and for this one I spiced it up by using 2 different colors in the background instead of one. I started with the idea that I wanted the color orange in this quilt. It's one of my favorite colors and I hadn't used it (in quantity) in any quilt to date. After falling for the perfect orange, I thought it would be cool to use fabric with circular patterns in it for each color. I like my fabrics in quilts to follow a 'theme'. All floral, all stripes, etc because I feel like it makes for a more cohesive design. After finding a teal-y blue and a white with copper metallic circles on it (how much more perfect could THAT find get???). I was set to go. You can see my selections on the right.

So in approximately 24 hours I made this:




I apologize for the bad pictures. I really need a good camera - these (like everything else) were taken on my phone. Also, obligatory 'kitty helped me' photo on the right!

The borders stumped me for a bit, I wasn't sure what I wanted to do, especially since I didn't have miles of extra fabric. This top in the end used nearly every scrap of the 8.5 yards I had. I want to see if I can find the blue somewhere else so I can bind it in that color.

Before binding it will have to be quilted, but that will come later. I haven't settled on a pattern for the quilting yet and it's time to get back to other projects.

That said, it sure was nice to clear my head on this project!

Tuesday, March 12, 2013

DIY: Garden Boxes


For several years now I've had a project I wanted to take on, but I was always afraid to 'get my hands dirty' or that it wouldn't work out. Well this year I've had enough! I'm going to try my hand at growing some of my own produce.

These instructions call for cedar fencing - each plank runs for only around $2, and cedar is better for garden boxes because it is resistant to rot and doesn't contain the chemicals that standard lumber often does which could get into your produce.

Supplies (for one 3'x6' box)
  • 6' Cedar Fence planks (x6)
  • 2"x2" (x2)
  • 1.5" screws
  • tape measure
  • power drill
  • power saw
  • safety goggles
How-To Build a Raised Garden Bed from Cedar Fencing.

If your fence planks have the corners of one side tapered like mine did, start by sawing off the the tapered end so both ends are square (wearing your safety goggles of course).

Then measure cut 2 of your cedar planks in half.

Then saw your 2"x2"s into 18" pieces - now we're ready to assemble!

1. Lay out 2 of the 2"x2" sections - one beneath each end of a cedar plank and screw in place as shown with 2 screws on each end.

2. Butt a second plank to the first and screw together as well.

3. Measure and mark the center point of your wall, screw a 3rd 2"x2" section here (this post ads extra strength on the long sides of your box). Put this wall aside and repeat steps 1-3 for the other long side.

4. Stand your long sides up, lining up one of half-planks you cut earlier on the end. Screw in place - watch out you don't hit the other screws holding the long planks on.

5. Repeat step 4 on the other side, closing all sides of the box.

6. Add the second short plank to each side - you've completed your box!

You will see there is still 6" of the 2"x2" posts sticking out of the box - this side of the box goes on the ground, with the posts sunk into the earth (you will need to dig a hole for each one). These little posts offer extra stability for the box and help hold it in place.

Now all we need is to fill the box! I'll discuss the plans I have for that next time. For now, check out the boxes I made! They are still upside down - the ground was just a little frozen yet to start digging.


Thursday, February 28, 2013

Life and Kitties

So costuming isn't the only thing we've been up to lately. We've been INCREDIBLY busy. And  I know what you're thinking - so what else is new, right?

I know, but here's a little update on just details in general.

Since I'm done with school I kind of have my evenings back again. So I've been costuming like a crazy person, but I also often end up working some in the evenings too. I know I shouldn't (work-life balance and all of that) so I'm trying to change that. I've also been up to my parent's a few times, and we've had some friends over for a few different things which has been a lot of fun. But really the busy one right now is Brian.

He's student teaching right now, getting ready to graduate from school (FINALLY). And it's going incredibly well, but he's completely exhausted. He also is taking 1 last class that he needed AND still working at Lowe's part time. So his school/work days are usually 12-14 hours long and he almost never gets a full day off. It has been rough for him, but also for both of us because we spend almost no time together right now. The good news is that if all goes to plan he'll be done in 2 months! Then hopefully he can find a job before too long and we can stop all this 'working nights' nonsense.

So I spend a lot of my evenings at home with the kitties right now. Ah yes, the kitties. I mentioned we added to our little family in the form of a new kitten. And he's a pill. Seriously.

Odin is very sweet, and loving and snuggly - but he does his best to drive us and Goji up the wall. When he's not wrestling with Goji he's trying to get up on the table and other places he's not supposed to go. We tried putting tape on the table, but he's too smart and just waited for us to remove the tape a few days later and then he was right back up there. Goji's taking the disturbance like a champ (a really noisy, growly champ). He's getting more relaxed around the little fuzzball and slowly returning to his normal behaviors, so he'll only get better as Odin grows out of kittenhood I think.

They definitely are extremely entertaining, and seem to enjoy eachother's company. Sometimes.

What? We weren't doing anything...

Thursday, February 21, 2013

SDCC Costume: Zelda Part 3 - Embellishment

So, to keep up with the progress I've been making on the costume, I'll keep up with making progress documenting it.

One of the biggest concerns for me when designing how this dress would work was how to create the details on the skirt. In the game documentation and concept art, there are hints of some type of complex embroidery (or something) above the trim at the hem, but there's no clear way of telling what it really is or how it's constructed. So I looked to see what other costumers had done, and that didn't really give me any answers. So I decided this was one of those places where I could make it my own and interpret it in a way that I would find cool.

I opted for applique. First I figured out what the shape of the pattern was, and how big it should be by sketching it out.

Then I figured out how I would break up that pattern into individual pieces and what material would go where, and cut those 'patterns' out of tracing paper. For the material, I opted for a mix of metallic and white leathers (fake). I liked the texture, and the fact that they won't fray makes my life easier.

Materials and a charcoal yarn for 'trim'
Pieces cut out!

Then, after measuring where on the skirt they should go I spent 2 evenings placing all the pieces with adhesive. I wasn't sure at this point how I wanted to add in the additional detail. I started with using the charcoal yarn I bought as a trim... but I hated it. And the act of experimenting with it destroyed the pattern I'd done it on as it marred the (extremely fickle) pleather.

I tried stitching it on by machine, by hand, gluing it... no matter what I did it looked 'crafty' and distracted from the material. It also made the appliques appear harsh and stuck on instead of flowing with the skirt.

It had to go. Unfortunately the only way to fix it? Completely replacing that panel of the underdress - fun right? I did that fairly quickly but I spent most of that time cursing anyway.

Then I opted to add the criss-cross detail by actually removing slivers from the gold pieces, and added detail will be done with little silver and gold rhinestones. I'll add those at the very end after I get ALL of these appliques on. There are additional scroll-work portions that connect the individual shapes all the way around (but I of course needed to get these main pieces attached first so I could guarantee that my measurements are right and all the pieces are exactly equidistant).

That's where I am with the embellishments  so far (don't worry, there's a pic at the bottom).

~~~~~~~~~~

Along with working on the tricky stuff above I opted to finish the additional piece to go with my pauldrons. Now that I knew for sure where the neckline of the dress would be, I could measure to make sure this piece was the right size sat in the proper place.

 The crystals took forever to find. I ended up finding the perfect ones on ebay from a chandelier supplier for only a few dollars (I got 10)!

I made the 'metal' parts out of foam, fabric, glue, spray rubber and paint in the same fashion as the shoulder pieces. Everything was attached using a mix of metal rings and felt. I glued felt loops inside where they would not be seen where I could attach the metal rings. Since glued felt is so strong, I was confident this method would be tough without wearing out the foam (so far so good).

I still have more stones and crystals to add on the shoulder pieces, but I still have to find the right ones. For the time being, I was excited to try it on and see how it fit...


It fits great! I'm so happy, the addition of the new piece in the front makes the armor sit perfectly and it requires next to no adjustment while wearing to stay on and centered.

This is getting exciting, but I'm not sure what piece I should accomplish next...